ppmshadow - add simulated shadows to a portable pixmap image

1 000 000

ppmshadow(1) ppmshadow(1)

ppmshadow - add simulated shadows to a portable pixmap image

ppmshadow [-b blur_size] [-k] [-t] [-x xoffset] [-y yoffset] [-u] [pnm‐

ppmshadow adds a simulated shadow to an image, giving the appearance
that the contents of the image float above the page, casting a diffuse
shadow on the background. Shadows can either be black, as cast by
opaque objects, or translucent, where the shadow takes on the colour of
the object which casts it. You can specify the extent of the shadow
and its displacement from the image with command line options.

-b blur_size

Sets the distance of the light source from the image. Larger
values move the light source closer, casting a more diffuse
shadow, while smaller settings move the light further away,
yielding a sharper shadow. blur_size defaults to 11 pixels.

-k Keep the intermediate temporary image files. When debugging,
these intermediate files provide many clues as to the source of
an error. See FILES below for a list of the contents of each

-t Consider the non-background material in the image translucent --
it casts shadows of its own colour rather than a black shadow,
which is default. This often results in fuzzy, difficult-to-
read images but in some circumstances may look better.

-u Print command syntax and a summary of options.

-x xoffset
Specifies the displacement of the light source to the left of
the image. Larger settings of xoffset displace the shadow to
the right, as would be cast by a light further to the left. If
not specified, the horizontal offset is half of blur_size
(above), to the left.

-y yoffset
Specifies the displacement of the light source above the top of
the image. Larger settings displace the shadow downward, corre‐
sponding to moving the light further above the top of the image.
If you don't specify -y, the vertical offset defaults to the
same as the horizontal offset (above), upward.

Input is an anymap named by the pnmfile command line argument; if you
don't specify pnmfile, the input is the Standard Input file.

Output is a always a PPM file, written to Standard Output.

pnmfile creates a number of temporary files as it executes. It creates
them in the /tmp directory, with names of the form:


where pid is the process number of the ppmshadow process and N is a
number identifying the file as described below. In normal operation,
ppmshadow deletes temporary files as soon as it is done with them and
leaves no debris around after it completes. To preserve the intermedi‐
ate files for debugging, use the -k command line option.

N in the filename means:

1 Positive binary mask

2 Convolution kernel for blurring shadow

3 Blurred shadow image

4 Clipped shadow image, offset as requested

5 Blank image with background of source image

6 Offset shadow

7 Inverse mask file

8 Original image times inverse mask

9 Generated shadow times positive mask

10 Shadow times background colour

The source image must contain sufficient space on the edges in the
direction in which the shadow is cast to contain the shadow -- if it
doesn't some of the internal steps may fail. You can usually expand
the border of a too-tightly-cropped image with pnmmargin before pro‐
cessing it with ppmshadow.

Black pixels and pixels with the same color as the image background
don't cast a shadow. If this causes unintentional "holes" in the
shadow, fill the offending areas with a color which differs from black
or the background by RGB values of 1, which will be imperceptible to
the viewer. Since the comparison is exact, the modified areas will now
cast shadows.

The background color of the source image (which is preserved in the
output) is deemed to be the color of the pixel at the top left of the
input image. If that pixel isn't part of the background, simply add a
one-pixel border at the top of the image, generate the shadow image,
then delete the border from it.

If something goes wrong along the way, the error messages from the var‐
ious Netpbm programs ppmshadow calls will, in general, provide little
or no clue as to where ppmshadow went astray. In this case, Specify
the -k option and examine the intermediate results in the temporary
files (which this option causes to be preserved). If you manually run
the commands that ppmshadow runs on these files, you can figure out
where the problem is. In problem cases where you want to manually
tweak the image generation process along the way, you can keep the
intermediate files with the -k option, modify them appropriately with
an image editor, then recombine them with the steps used by the code in
ppmshadow. See the ppmshadow.doc document for additional details and
examples of the intermediate files.

Shadows are by default black, as cast by opaque material in the image
occluding white light. Use the -t option to simulate translucent mate‐
rial, where the shadow takes on the colour of the object that casts it.
If the contrast between the image and background is insufficient, the
-t option may yield unattractive results which resemble simple blurring
of the original image.

Because Netpbm used to have a maximum maxval of 255, which meant that
the largest convolution kernel pnmconvol could use was 11 by 11,
ppmshadow includes a horrid, CPU-time-burning kludge which, if a blur
of greater than 11 is requested, performs an initial convolution with
an 11×11 kernel, then calls pnmsmooth (which is actually a script that
calls pnmconvol with a 3×3 kernel) as many times as the requested blur
exceeds 11. It's ugly, but it gets the job done on those rare occa‐
sions where you need a blur greater than 11.

If you wish to generate an image at high resolution, then scale it to
publication size with pnmscale in order to eliminate jagged edges by
resampling, it's best to generate the shadow in the original high reso‐
lution image, prior to scaling it down in size. If you scale first and
then add the shadow, you'll get an unsightly jagged stripe between the
edge of material and its shadow, due to resampled pixels intermediate
between the image and background obscuring the shadow.

ppmshadow returns status 0 if processing was completed without errors,
and a nonzero Unix error code if an error prevented generation of out‐
put. Some errors may result in the script aborting, usually displaying
error messages from various Netpbm components it uses, without return‐
ing a nonzero error code. When this happens, the output file will be
empty, so be sure to test this if you need to know if the program suc‐

pnm(5), pnmmargin(1), pnmconvol(1), pnmscale(1), pnmsmooth(1), ppm(5)

John Walker August 8, 1997

This software is in the public domain. Permission to use, copy, mod‐
ify, and distribute this software and its documentation for any purpose
and without fee is hereby granted, without any conditions or restric‐

12 March 2000 ppmshadow(1)